In order to make the equipment run more stably when using the band saw sports car for a long time, it is necessary to perform necessary daily maintenance and upkeep on the woodworking band saw sports car:

< ;p> 

1. The safe operating procedures of the equipment must be strictly followed;

2. The saw blade should be clean and flat, and the tooth shape should be consistent and complete.

3. The saw blade has no burrs, no teeth, the joints are flat, and there are no cracks;

4. The saw blade is installed in the correct position;

< p>5. The guide bracket is in the correct position. The rollers are not worn and can roll flexibly;

6. The saw blade has no cracks or looseness and rotates normally;

7. Bearing The adjustment is sensitive and the positioning is firm;

8. The counterweight is in the correct position and the positioning is reliable;

9. The parts are firmly fixed, clean, without scratches, flexible in movement and positioning. Reliable;

10, the protective cover is intact, complete and fixed;

11, the motor is not loose and rotates normally;

12, The power control switch is sensitive and normal;

13. The power cord is neat, the fixed insulation is reliable, and there is no aging, peeling, damage, etc.;

14. The oil cup (hole) is clean Grease, lubricating tools are clean and complete;

15. Equipment is clean and fully equipped;

16. Make inspection and maintenance records to ensure that the machine is in good condition.